AZ EN RU
Why is your sofa seat sagging?
4 min read

Why is your sofa seat sagging?

Has your usual spot on the sofa developed a hollow that stays after you get up? Sometimes the cushion becomes thinner; sometimes the whole seat drops and you can feel a hard part underneath. Foam is not the only possible cause. A furniture repair technician can assess the filling, the support below it and the frame together to identify which part needs attention.

Feeling a spring does not automatically mean it is broken: the padding above it may have thinned. Equally, a cushion that looks fine can sink because its support has weakened. Ordering new foam based on appearance alone can leave the real problem unresolved.

What makes a sofa seat sag?

The foam and filling no longer hold their shape

Seat foam can lose resilience with use. Sitting in the same spot repeatedly concentrates wear. If a removable cushion stays hollow in the middle while its edges remain higher, the filling may be worn. Reshaping can help some fibre or feather fillings, but plumping does not restore permanently deformed foam.

Springs, webbing or fasteners have weakened

Depending on its construction, a sofa may use springs, elastic webbing or another supporting base. Stretched webbing, a broken spring or a detached fixing can let even a sound cushion sink. A deep dip in one spot, a metallic noise or a hard protrusion calls for an inspection of the support. Not every sofa has the same spring system; replacement parts must suit the model.

The frame or leg support is damaged

If the seat dropped suddenly, one side sits lower or the whole body looks uneven, the wooden frame, joints and legs also need checking. Dragging the sofa, jumping on it or placing a heavy load on one point can damage joints. Adding new foam will not repair a failed structural support.

What happens if you keep using it?

Continued loading of a weakened support can damage neighbouring fixings and upholstery. A protruding spring can tear fabric and cause injury. Stop using the affected seat if there is a cracking sound, exposed metal, pronounced distortion or instability. Wedging a board underneath can hide the fault and transfer weight to points not designed to carry it.

When contacting 166 Usta, explain whether the hollow is confined to the cushion or is also visible in the support below. This distinction helps with the initial assessment.

What can you safely check at home?

  • Clear the sofa. Remove only cushions designed to come off and compare their shapes on a flat surface; do not undo sewn sections.
  • Look from outside for a visible dip, tear or detached part in the support. Do not put your hand beneath the upholstery or between springs.
  • Check whether the legs meet the floor and whether cracks are visible. Do not tip a heavy sofa by yourself or crawl underneath it.
  • Turn or swap cushions only if the manufacturer permits it. Reshape the filling as instructed; this does not repair a broken base.

Avoid soaking foam, trying to expand it with hot steam, bending springs or cutting upholstery to push extra material inside. Even without obvious danger signs, do not test a persistent hollow by adding more weight. For a recently purchased sofa, check the warranty before dismantling anything.

What information should you prepare for the technician?

Prepare an overall photo, top and side views of the sunken area, the make and model and its approximate age. Explain whether the change was sudden or gradual, whether there is noise or a hard protrusion, and whether the sofa was recently moved. Mention whether the cushions are removable and whether it converts into a bed. Do not load a damaged seat again just to take a photo.

How does 166 Usta assess the problem?

The technician checks the frame, legs, joints and seat supports. The inspection establishes whether refastening, support repair or a suitable replacement part is feasible, along with the scope and price. Foam, spring-unit and extensive upholstery replacement must be agreed separately according to the model and damage.

This helps avoid replacing sound parts unnecessarily. If repair is not feasible or its cost does not justify the result, that is explained too. After the agreed work, the supports and seat are checked for stability and condition.

If your sofa has lost its comfort, find out why before covering the hollow with extra cushions. To book a furniture repair service, call +994 50 274 92 92 or send a request through our contact page. Share photos and the symptoms so we can agree a suitable inspection time.

Frequently Asked Questions

No. Springs, webbing, fasteners, the frame and leg supports can also cause it. The cushion and its supporting parts should be assessed together.
Reshaping helps certain fillings and cushions that the manufacturer allows you to turn. It does not restore permanently deformed foam or repair a broken support.
Thinner padding may be the cause, but stop using the affected seat if a spring protrudes, metal is exposed, there is a cracking sound or the seat is unstable. Arrange an inspection.
Not always. The decision depends on the frame, the damaged part, suitable replacement parts and repair costs. Foam and upholstery replacement must be confirmed separately.
Call +994 50 274 92 92 or send a request through https://166usta.az/en/contact. Share sofa photos, when the problem started and your address.